[\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row column_structure=”3_5,2_5″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”3_5″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n
Do You Have A Seized Pump?<\/h2>\n
If you have a centrifugal pump that is seized, Boulden has a fast, easy and effective solution. Boulden supplies advanced composite materials and machined components which do not seize. At the time of repair, the stationary parts will be upgraded to a\u00a0non-metallic composite wear ring<\/a>\u00a0or bushing and the rotating wear ring or sleeve will remain metal. This simple change eliminates the metal-to-metal contact points in the pump and essentially eliminates the risk of pump seizure.<\/p>\n A centrifugal pump can seize when there is excessive metal-to-metal contact at rotating to stationary interfaces like wear rings, center bushings, and throttle bushings. Pump seizure can cause a lot of damage and in some services create a significant safety or environmental hazard. In other situations, maybe the pump is jammed during alignment or the motor trips at start-up because of galling at the pump wear rings. Just a small piece of debris getting between metal wear rings can cause a pump seizure. Vespel\u00ae CR-6100 and Boulden B-Series wear parts do not seize and therefore assembly, alignment, and pump start-up are much easier and more reliable.\u00a0Send us your project requirements today<\/a>![\/et_pb_text][\/et_pb_column][et_pb_column type=”2_5″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/bouldencompany.com\/wp-content\/uploads\/2021\/12\/Vespel-Solutions-Seizure-1.jpg” alt=”Seized Metal Wear Rings Boiler Feed Water Pump” title_text=”Vespel Solutions Seizure 1″ align=”center” _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][et_pb_image src=”https:\/\/bouldencompany.com\/wp-content\/uploads\/2021\/12\/Vespel-Solutions-Seizure-2.jpg” alt=”Seized Metal Wear Rings” title_text=”Vespel Solutions Seizure 2″ align=”center” _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.17.3″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n Boulden can supply\u00a0<\/span>components made from composite materials Vespel\u00ae CR-6100<\/a>\u00a0or the\u00a0<\/span>Boulden B-Series materials<\/a>\u00a0depending on the size and process conditions. We can handle temperatures from cryogenic to 260 C (500 F) and nearly any process chemical. So, if you have a seized pump in almost any process from light hydrocarbons to boiler feed water or hydrofluoric acid, Boulden can solve all centrifugal pump seizure problems. If you can supply the dimensions of the parts and process conditions for the pump which is seized up, we can quickly provide a quote and material recommendation. We have material in stock and in-house machining capabilities to supply raw material or parts with the best delivery times in the industry.<\/span><\/p>\n Vespel\u00ae CR-6100 and Boulden B-Series composites are simple, easy-to-install, cost-effective solutions for pump seizure challenges.\u00a0<\/span>Get a quote today<\/a>\u00a0or work with us to get your pump running by\u00a0<\/span>contacting Boulden Company<\/a>.\u00a0For current case studies and technical tips\u00a0<\/span>sign up for our newsletter<\/a>.<\/span>[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section]<\/p>\n","protected":false},"excerpt":{"rendered":" AVOID PUMP SEIZUREDo You Have A Seized Pump? If you have a centrifugal pump that is seized, Boulden has a fast, easy and effective solution. Boulden supplies advanced composite materials and machined components which do not seize. At the time of repair, the stationary parts will be upgraded to a\u00a0non-metallic composite wear ring\u00a0or bushing and the rotating wear ring or sleeve will remain metal. This simple change eliminates the metal-to-metal contact points in the pump and essentially eliminates the risk of pump seizure. What Causes A Centrifugal Pump To Seize? A centrifugal pump can seize when there is excessive metal-to-metal contact at rotating to stationary interfaces like wear rings, center bushings, and throttle bushings. Pump seizure can cause a lot of damage and in some services create a significant safety or environmental hazard. In other situations, maybe the pump is jammed during alignment or the motor trips at start-up because of galling at the pump wear rings. Just a small piece of debris getting between metal wear rings can cause a pump seizure. Vespel\u00ae CR-6100 and Boulden B-Series wear parts […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":995,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"custom-template.php","meta":{"_acf_changed":false,"_et_pb_use_builder":"on","_et_pb_old_content":"What Causes A Centrifugal Pump To Seize?<\/h2>\n
Which Process Condition Issues Do Composite Components Solve?<\/h2>\n
If you have a seized pump, contact Boulden today<\/h2>\n
\n \t
Avoid pump Seizure<\/h1>\nClick Here for the\u00a0Vespel\u00ae CR-6100 INSTALL GUIDE<\/a><\/strong>\n
![\"Dupont](\"https:\/\/bouldencompany.com\/wp-content\/uploads\/2021\/12\/Vespel-Solutions-Seizure-1.jpg\" "\\"Advanced")
\nThese metal wear rings had to be\ncut out of a seized pump in boiler feed service.\n![\"Vespel](\"https:\/\/bouldencompany.com\/wp-content\/uploads\/2021\/12\/Vespel-Solutions-Seizure-2.jpg\" "\\"Advanced")
\nThis naphtha pump seized causing the rotating and stationary wear rings to weld together.\nDo You Have A Seized Pump?<\/strong><\/h3>\nIf you have a centrifugal pump that is seized, Boulden has a fast, easy and effective solution. Boulden supplies advanced composite materials and machined components which do not seize. At the time of repair, the stationary parts will be upgraded to a non-metallic composite wear ring<\/a> or bushing and the rotating wear ring or sleeve will remain metal. This simple change eliminates the metal-to-metal contact points in the pump and essentially eliminates the risk of pump seizure.\n
What Causes A Centrifugal Pump To Seize?<\/h3>\nA centrifugal pump can seize when there is excessive metal-to-metal contact at rotating to stationary interfaces like wear rings, center bushings, and throttle bushings. Pump seizure can cause a lot of damage and in some services create a significant safety or environmental hazard. In other situations, maybe the pump is jammed during alignment or the motor trips at start-up because of galling at the pump wear rings. Just a small piece of debris getting between metal wear rings can cause a pump seizure.\nVespel\u00ae CR-6100 and Boulden B-Series wear parts do not seize and therefore assembly, alignment, and pump start-up are much easier and more reliable. Send us your project requirements today<\/a>!\n
Which Process Condition Issues Do Composite Components Solve?<\/h3>\nBoulden can supply components made from composite materials Vespel\u00ae CR-6100<\/a> or the Boulden B-Series materials<\/a> depending on the size and process conditions. We can handle temperatures from cryogenic to 260 C (500 F) and nearly any process chemical. So, if you have a seized pump in almost any process from light hydrocarbons to boiler feed water or hydrofluoric acid, Boulden can solve all centrifugal pump seizure problems.\nIf you can supply the dimensions of the parts and process conditions for the pump which is seized up, we can quickly provide a quote and material recommendation. We have material in stock and in-house machining capabilities to supply raw material or parts with the best delivery times in the industry.\n
If you have a seized pump, contact Boulden today<\/h2>\nVespel\u00ae CR-6100 and Boulden B-Series composites are simple, easy-to-install, cost-effective solutions for pump seizure challenges. Get a quote today<\/a> or work with us to get your pump running by\u00a0contacting Boulden Company<\/a>.\u00a0For current case studies and technical tips sign up for our newsletter<\/a>.","_et_gb_content_width":"","om_disable_all_campaigns":false,"_analytify_skip_tracking":false,"footnotes":""},"acf":{"content_type":["Success Stories"],"associated_material":["Vespel CR-6100","B-835","B-920","B-1050","Metcar M-161","Metcar M-300"],"industry_application":["General Industrial"],"component":["Pump Wear Rings","Pump Throttle Bushings","Vertical Pump Shaft Bearings"]},"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/bouldencompany.com\/wp-json\/wp\/v2\/pages\/1003"}],"collection":[{"href":"https:\/\/bouldencompany.com\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/bouldencompany.com\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/bouldencompany.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/bouldencompany.com\/wp-json\/wp\/v2\/comments?post=1003"}],"version-history":[{"count":16,"href":"https:\/\/bouldencompany.com\/wp-json\/wp\/v2\/pages\/1003\/revisions"}],"predecessor-version":[{"id":5365,"href":"https:\/\/bouldencompany.com\/wp-json\/wp\/v2\/pages\/1003\/revisions\/5365"}],"up":[{"embeddable":true,"href":"https:\/\/bouldencompany.com\/wp-json\/wp\/v2\/pages\/995"}],"wp:attachment":[{"href":"https:\/\/bouldencompany.com\/wp-json\/wp\/v2\/media?parent=1003"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}